To enter calibration mode on the Mutable Instruments peaks, power the module on with the second button pressed. The first and second knobs act as coarse/fine adjustments for offset on channel 1 (The third and fourth knobs do the same for channel 2). Check both channels with a multimeter and adjust until they’re at 0V. …
Tag Archives: synth
The wonderful, perplexing MFB-503
Ah, MFB. Maker of wonderful instruments and usually bewildering user interfaces. Today we look at the MFB-503 Drumcomputer To start, press play. My unit seems to sometimes set the tempo of empty patterns to zero causing the pattern to appear to not play. Each pattern has an a and a b section. To select a …
Programming the MFB Tanzbar Lite
Note: If you have not used the Tanzbar Lite for a time, be sure to press the buttons firmly. They seem to not work well when left unused. After a session of use (and firm presses) they should to start working normally again. Like most MFB products, the Tanbar light is a mix of great …