The Roland Juno 106 does not have a built-in midi “All notes off” button or function. If you get a stuck or hung note you need to either turn off the synth or use some outside midi tool to send the all notes off command. I did find a work-around though – if you change …
Tag Archives: midi
Does the Yamaha DX100 send program change commands?
The manual for the DX100 says it sends program changes yet mine refused to do so. Here is how to make the DX100 send program changes. To send program changes you must have “ch info” set to on (as the manual says). What the manual does not mention is that “sys info” must be set …
Continue reading “Does the Yamaha DX100 send program change commands?”
Notes on programming the Bitstream 3x Midi Controller
First some terminology: a “group” is the 3x’s name for a what would usually be called a preset – a definition of what all the controls should transmit. For most uses one would have a group for each device one wants to control. To select a group, press the “group” button on the bottom row …
Continue reading “Notes on programming the Bitstream 3x Midi Controller”