Noting down some saved information<\/p>\n\n\n\n
From gearslutz :<\/p>\n\n\n\n
To sync the Nord Lead 3 arp to midi:<\/p>\n\n\n\n
“Connect your midi cables, out of sequencer (or clock source) to input of the NL3
<\/p>\n\n\n\n
Press the MasterClock button (configuration buttons) and select EXT as a source clock (instead of INTERNAL)<\/p>\n\n\n\n
Press RUN to start the arpeggiator – the green light will go on (the rate will be controlled by the external clock source ie. your sequencer).<\/p>\n\n\n\n
Then press the SHIFT AND THE ARP RATE KNOB left or right to set the timing ie. 4, 4T, 8, 8T etc.<\/p>\n\n\n\n
The red light below should be lighted and your arpeggiator will play back in perfect timing with your sequencer.<\/p>\n\n\n\n
… there seems to be no mention of this in the manual.”<\/p>\n\n\n\n
<\/p>\n","protected":false},"excerpt":{"rendered":"
Noting down some saved information From gearslutz : To sync the Nord Lead 3 arp to midi: “Connect your midi cables, out of sequencer (or clock source) to input of the NL3 Press the MasterClock button (configuration buttons) and select EXT as a source clock (instead of INTERNAL) Press RUN to start the arpeggiator – … <\/p>\n